Note that for this verification we are using the default “New Lambda (10-18AFR)” type for AN1 / LAMBDA1 channel Verifying the Heating Up phase The controller will provide 2 different voltages / outputs for the heating-up and steady phases During the first seconds, the controller is in the heating-up phase and will output aprox 2.5V …
Windows can eventually detect a high data stream from the DAQ (and previously from the Weather Station) and decide that it is a MOUSE, it will install the Ballpoint Drivers and will block the access from other applications. The cursor in the screen can become crazy as it will interpret the data from the DAQ …
During the installation / setup process it is common that some settings are not correct which can lead to ‘absurd’ readings (very high or very low). It is important to do this check list: After the installation: It may exist differences specially in high power cars and specially on twin roller dynos High Power Cars …
The provided USB-RS232 adapter has a default latency which results too slow for realtime data displaying. It does not affect to the recording but makes the visualization very slow. There are two options: FTDI Port Manually setting the COM Latency to 1 ms (advanced)
Something that causes many misunderstandings to new users regarding the SP1 configuration is the confguration of number of teeth and prescaler due to the fact that the SP1 does not syncrhonize these settings with the PC (the SP1 will not send this information during the connection process and then the PC will not be able …
SP1 configuration (number of Teeth and Prescaler) Read More »
