Specifications
- Operating Voltage 9V to 16V
- Power Consumption 25 Watt Max
- Analog Output AFR Linear 0-5V
- Useful Lambda Range 10-18
- AFR Accuracy < 0.1AFR (Gasoline)
Lambda Controller
115.00€ – 329.00€
Supplied with SportDevices SP1/SP5 analog input connector, also suitable for any data-acquisition system (2D data-recording, AIM…). It incldes a 8 meter signal + 12V cable to ease the connection to SPx units. Please note that the 12V source is not included.
Features:
- Accurate Air/Fuel Ratio <0.1, Fast Reaction
- Wideband LINEAR Analog Output (0-5V)
- Sensor soft start circuitry, prolongs o2 sensor life.
- Compact and Professional Design
*Prices do not include VAT
Sensor
- Type Bosch LSU4.9
- Accuracy +/- 0.7%
- Exhaust Temp Limit 1030 C
- Cable & Protector Sleeve Temp Limit 250 C
- Mounting M18 X 1.5 thread
- Nominal Service Life 80,000 km for Unleaded Fuel
Connection
- Power: the lambda requires a DC power supply with 12V and at least 1.5A
- Power connector: it has two wires: Brown=GND, Yellow=12V
- Output: the controller provides an extension cable with a 6 pin connector for the SPx DAQs, it can be connected to Lambda 1 / AN1 or Lambda 2 / AN2 connectors.
- SP6: In the case of the SP6 it is necessary to add either an intermediate connector or just remove the 6 pin connector to use the “screw-type” connector